You need: lace;
satin; organza (of two or three tinctures, for example, of lacteous white and
cream white as well as light rose), sheer fatin for bodice pieces, ready
underskirt; zipper, hooks (for neckline closure), lace border for trimming.
IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM
ALLOWANCE IS PROVIDED,
IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM
ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCES: 1 cm for
middle back seam (to stitch the zipper). 1 cm for other seams
ATTENTION! Before sewing, print paper patterns and lay them out
according to the linen width (minimal width is 150 cm) to find out how much
material you need (do not forget about double and symmetric details).
WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE
COINCIDING!
PLEASE KEEP BEAM
THREAD DIRECTION.
CUTTING:
Satin:
1. Lower back skirt_4
– 2 pieces
2. Lower front
skirt_4 – 1 piece
Sheer fatin:
1. All bodice pieces
– 3 layers
Sheer lace:
1. All bodice pieces
Organza:
1. 3 upper layers of
skirt
Trimming: take
lace border of 2 cm width to stitch it (with zig zag stitches) along
neckline/front part edges and bodice armholes (you need approximately 3.5-4 m
of lace border). In this way you will close front edges of lace.
INSTRUCTIONS:
1. All front upper
pieces are of 3 layers of fatin (to make them less transparent and stiff) and
of 1 layer of lace.
2. Pleat upper skirts
at left side by hand.
3. The zipper is in
middle back seam.
4. The skirt has 4
separate layers: 3 upper skirts are of organza, 1 lower is of satin.
5. Make asymmetrical
undercut into ready underskirt at hip level, then sew it as lower layer.
6. Sew lace border to
neckline/armholes of ready bodice.
7. Overlap the line
joining the skirt and the bodice with folded waistband. Sew the waistband to
side seams when the garment is on a mannequin.
8. Fix 2 organza
flowers on skirt left side.