ATTENTION!
All patterns are with seam allowances.
Please pay attention to notches in the process in
stitching. The notes must coincide!
CUTTING:
Fabric:
1. Center back part – 2 folded pieces
2. Side back part – 2 pieces
3. Side front part – 2 pieces
4. Back neckline facing – 1 folded piece
5. Center front part – 2 pieces
6. Front band – 2 pieces
7. Upper sleeve – 2 pieces
8. Lower sleeve – 2 pieces
Another fabric:
9. Off-set welt – 2 pieces
10. Outer collar – 1 folded piece
Fusing:
11. Off-set welt – 2 pieces
12. Back neckline facing – 1 folded piece
13. Front band – 2 pieces
14. Outer collar – 2 pieces
Lining:
15. Upper sleeve – 2 pieces
16. Lower sleeve – 2 pieces
17. Center front part – 2 pieces
18. Center back part – 2 pieces
19. Side back part – 2 pieces
20. Side front part – 2 pieces
INSTRUCTIONS:
1. Sew back middle/relieve seams, sew front relieve
seams.
2. Fold the welt along bending line, process it neatly
along short edges. Stitch welt lower edges to front part along the marking.
Fold the welt out, press it and topstitch it on front part.
3. Stitch side/shoulder seams.
4. Stitch middle seam of outer collar one-piece with
front bands. Stitch front shoulder seams and back neckline facings. Slash seam
allowances. Stitch inner collar into garment neckline; stitch outer collar into
facing neckline. Cut joining seams’ allowance close to stitch and press them
apart.
5. Lay front bands on front parts right sides together
and pin them to edgings; pin edges of outer/inner collars together. Process
garment’s seams of edging and collar neatly. Sew jacket hem. Sew front bands to
hem.
6. Stitch sleeve seams. Sew sleeve hems and stitch
sleeves into armholes easing them along sleeve caps.
7. Sew shoulder pads.
8. Stitch lining details. Stitch the lining to sleeve
hems, front bands’ inner edges and to back neckline facing. Sew the lining
under.
9. Make buttonholes into right front part, sew buttons
on left one.