YOU NEED: wool jersey; fusing.
NB!
Before sewing, print paper patterns and lay them out according to the linen
width (from 90 to 150 cm) to find out how much material you need (do not forget
about double and symmetric details).
CUTTING:
Fabric:
1. Front part – 1 folded piece
2. Back part – 1 folded piece
3. Collar – 1 folded piece
4. Placket facing – 2 pieces
5. Sleeve – 2 pieces
Fusing:
1. Placket facing – 2 pieces
INSTRUCTIONS:
1. Stitch front upper darts, stitch shoulder seams.
2. Stitch sleeves into armholes. Stitch sleeve/side
seams with the same stitches.
3. Press the fusing to wrong side of front neckline
corner. Stitch plackets to front part along long edges. Slash front seam
allowance toward stitch end. Press seam allowances apart. Fold the collar along
bending line and process neatly along short edges. Take collar’s both inner
edges and stitch into neckline so that collar’s edges were on seams joining
plackets. Fold the placket along bending line wrong side out; front bands are
on the collar.
4. Stitch front bands to the neckline, stitch
placket’s short upper edges. Fold front bands into wrong side and stitch on
front part along the seam joining plackets. Sew front bands’ upper edges to
shoulder seams’ allowances.
5. Lay right placket on the left one coinciding middle
lines. Stitch front part and plackets’ lower edges from inside.
6. Press garment/sleeve hems into wrong side and
topstitch with double needle.