5126 TROUSERS

 

YOU NEED: suitable for completes natural or mixed suit fabric of 150 cm width; 1 zipper of 22 cm length; 1 button.

 

CUTTING:

Fabric:

1. Front one-piece part with facing – 2 pieces

2. Back one-piece part with facing – 2 pieces

3. Belt loop – 4 pieces

4. Button catch – 1 piece

Fusing: facing details.

INSTRUCTIONS:

1. Apply the fusing to wrong side of one-piece facings.

 

2. Sew darts. Press darts towards the center.

 

3. Sew side seams. Sew leg inside seams. Press allowances apart. Sew front and back middle seams, leaving zipper hole unsewn. Press allowances apart from the top to place where roundings begin.

 

4. ZIPPER: Press one-piece facing for zipper into wrong side. Stitch the zipper under the closure allowance edge (left side) along the edge. Stitch zipper free braid to right side, to one-piece facing.

Fold the button catch along, overstitch it along upper and lower short ends.

Topstitch the zipper closure one-piece facing on the button catch on the left part of the trousers.

Stitch along the garment right edge, catching the facing.

 

5. TROUSERS UPPER PART: Turn one-piece facing into wrong side, then press the upper edge. Turn the facing from inside, then sew on the zipper braid. Additionally: sew facings lower edges to seam allowances and darts depths.

 

6. Topstitch belt loops on the parts of trousers.

 

7. Make the buttonhole into the right part, sew the button on the left one.

 

8. HEMS: turn hem allowances into wrong side, then sew by hand.