YOU
NEED:
natural or mixed, suit fabric of 150 cm width; 1 zipper of 22 cm
length.
CUTTING:
Fabric:
1.
Middle front part – 2 pieces
2.
Side front part – 2 pieces
3.
Back part – 2 pieces
4.
Back facing – 1 piece
5.
Front facing – 2 pieces
6.
Button catch – 1 piece
Fusing:
facing details.
INSTRUCTIONS:
1. Apply
the fusing to wrong side of facings.
2. Sew
darts. Press dart depths towards the center
3. Sew
front relieves to notch mark. Press allowances apart.
4.
Sew side seams. Sew leg inside seams. Press allowances apart. With one stitch,
sew front and back middle seams, leaving closure slit unsewn. Press allowances apart from the top to place where
roundings begin.
5. ZIPPER: Press one-piece facing for zipper into wrong side. Stitch the zipper under the closure allowance edge (left side) along the edge. Stitch zipper free braid to right side, to one-piece facing.
Fold the button
catcher along the center, overstitch it along upper and lower short
ends.
Topstitch the
zipper closure one-piece facing on the button catch on the left part of the
trousers.
Stitch
along the skit right edge, catching the facing.
6.
TROUSERS UPPER PART: sew facings along side edges. Topstitch fading on the upper
edges of parts, right sides together. Cut the allowances to 0.5 cm width, place
them under facings, them stitch along the edge. Turn facing
into wrong side, then press the upper edge. Turn the facing from inside,
then sew on the zipper braid. Additionally: sew facings
lower edges to seam allowances and darts depths.
7.
HEMS: turn hem allowances into wrong side, then
sew.