YOU
NEED: suit fabric mixed
with lycra of 150 cm width; 1
zipper of 22 cm length; 3 buttons.
CUTTING:
Fabric:
1. Front
upper part – 2 pieces
2. Front
lower left part – 2 pieces
3. Front
lower right part – 2 pieces
4. Back
part – 2 pieces
5. Front
sacking – 2 pieces
6. Back
pocket – 2 pieces
7.
Button catch – 1 piece
8. Belt
loop – 4 pieces
9. Waistband – 1
piece
10. One-piece cut side wit sacking – 2 pieces
Fusing: waistband.
INSTRUCTIONS:
1. Apply
the fusing to wrong side of waistband.
2.
Topstitch the sackings on pocket entrances, right sides together. Cut joining
seams allowances to 0.5 cm width. Turn dsckings into wrong side. Topstitch
entrances on 0.75 cm distance. Pin front parts on the cut sides along marked
lines, then tuck to upper and lower entrances. Topstitch sackings to one-pice
(with sides) sackings from inside.
3. Tuck
the cut sides on front parts along front, upper and lower
edges.
4. Press
inner lengthwise hem allowances, then topstitch along the edge. Stitch upper and
lower parts along the figure edge. Press allowances and topstitch upwards along
the edge.
5. Place
front parts right sides together. Sew front middle seam under the notch mark,
stopping 2 cm below step seam.
6.
ZIPPER: press zipper closure one-piece facings into wrong side. Sew the zipper
under closure allowance (left side) along the edge. Sew zipper free braid on the
right part to one-piece facing. Fold the button catch along the center, then overstitch along upper and lower edges. Topstitch zipper
closure one-piece facing on the button catch of left part of the garment.
Topstitch the right edge of the slit catching the facing.
7. Place
a front part and a back one right sides together. Sew side seams. Sew leg inside
seams. Press allowances apart.
Sew back
edge and the slit of front edge. Press the allowances downwards the
roundings.
8.
Oversew the belt loops along the long and one of the short
edges.
9. Sew
one of belt straight edges and garment upper edge, right sides together (with
closure allwance at slit left edge left).
Insert
raw belt loops ends between the waistband and the garment edge when
stitching.
Press
the joining seams allowance to the waistband. Fold the waistband along the
center (right sides together), sew front ends together.
Turn the
waistband right side out. Topstitch it strictly along the joining seam, at right
side.
Topstitch belt
loops ready ends on the waistband.
10. The
hem: turn the hem allowance under, then
sew.
11. Make
a buttonhole into waistband right end, sew the button
to left one.
12. Sew
buttons on the figure details of front upper
parts.