YOU NEED:
mixed/nature fabric
suitable for suits of 150 cm width, 1 zipper of 22 cm length; 1
button.
CUTTING:
Fabric:
1. Front
part – 2 pieces
2. Back
part – 2 pieces
3.
Button catch – 1 piece
4. Belt
loop – 7 pieces
5.
Waistband – 1 piece
6. Front
side part – 2 pieces
Lining:
1. Lower
sacking – 2 pieces
2. Upper
sacking – 2 pieces
3. Front
part – 2 pieces
Fusing: the
waistband.
INSTRUCTIONS:
1. Apply the fusing to wrong side of waistband.
2. Sew darts, press the dart depths towards middle seams of parts.
3. Sew
upper sacking and front part right sides together, then
sew it along the pocket entrance. Turn the sacking into wrong side, then topstitch the front part along pocket entrance.
Topstitch the folded-ender front side part edge on the sacking upper
edge.
Pin the
front part on the front side part.
Sew
sacking edges from wrong side.
4. Sew
the lining and the front part wrong sides together along all edges excepting
lower one, catching sacking side and upper allowances.
5. Fold
front parts right sides together. Under the notch mark, sew front middle seam.
Stop sewing 2 cm before inside leg seam.
6.
ZIPPER: press zipper closure one-piece allowance into wrong side. Sew the zipper
under the closure allowance edge (left edge) along the edge. Sew zipper free
braid to right edge to one-piece facing. Fold the button catch along the center,
stitch it to upper and lower short edges. Topstitch the zipper closure one-piece
facing on the button catch on the garment left part. Topstitch the slit right
edge catching the facing.
7. Fold
one front and one back parts right sides together. Sew
side seams to the notch mark. Blank the hem. Sew step seam. Press seam
allowances apart.
Turn the
hem allowance into right side, then stitch along slit edges. Turn it, press,
then topstitch the hem on the garment along
marking.
8. Sew
the back edge and front edge unsewn part with one
seam. Press the allowances apart to the roundings.
9. Blank
the belt loops along the straight and one of short ends.
10. Sew
one of waistband lengthwise edges and garment upper edge, right sides together.
Leave the closure projecting allowance on the left edge.
Insert
belt loops raw ends between the waistband and the garment.
Press
the joining seam allowances toward the waistband. Fold the waistband along the
center, sew front ends. Turn the waistband right side out. Topstitch strictly
along joining seam on right side. Topstitch belt loops ready ends on the
waistband.
11. Turn
hem allowance into wrong side, then
sew.
12. Make
a buttonhole into waistband right end. Sew the button on the left
one.