YOU
NEED: denim mixed with
lycra of 150 cm width; 1
zipper of 22 cm length; 1 button.
CUTTING:
Fabric:
1. Front
part – 2 pieces
2. Back
part – 2 pieces
3.
Waistband right part – 1 piece
4.
Waistband left part – 1 piece
5.
Button catch – 1 piece
Fusing:
waistband detail
INSTRUCTIONS:
1. Apply
the fusing to wrong side of waistband.
2. Sew
darts, then press darts towards middle edges.
3. Fold
front parts right widths together, then sew front middle seam under the notch
mark, 2 cm below step seam.
4. ZIPPER: press the zipper closure one-piece facing into wrong side. Stitch the zipper under the allowance edge (left edge) along the edge. Sew zipper free braid to right edge, to one-piece facing. Fold the button catch along the center, then overstitch it along upper and lower short edges. Topstitch the zipper closure one-piece facing on the button catch on the left part of the garment. Topstitch the slit right edge catching the facing.
5. Fold
one front part and one back/one right sides together. Sew side seams and step
ones. Press allowances apart.
6. Sew
one of waistband lengthwise edges and garment upper edge, right sides together.
Left the projecting closure allowance on the left edge.
Insert
one part into another right sides together. Sew the
middle seam up to the waistband upper edge. Press the middle seam allowance
apart, to the rounding. Press detail joining seam allowance toward the
waistband. Fold the waistband along the center, right side together, then sew front ends. Turn the waistband right side out,
topstitch strictly along the joining seam from right side.
7. Press
the hem allowance into the wrong side, then stitch along the edge. Bend the cuff
accordingly to marking and sew it to side and step seams.
8. Make
a buttonhole into waistband’s right end, sew the button
on the left one.