MATERIAL:
well-forming material for skirts.
YOU
NEED: fabric
of 150 αm
width; fusing; 1 zipper of 20 αm
length, 2 zippers of 90 cm length.
CUTTING:
Fabric:
1.
Back panel - 2 details
2.
Front panels - 2 details
3.
Front panel facing - 1 folded detail
4.
Back panel facing - 2 details
5.
Gusset - 2 details
6.
Pocket - 1 detail
7.
Flap - 2 details
Fusing:
facings, upper details of flaps.
INSTRUCTIONS:
1.
Strengthen the facings and
upper details of flaps with fusing (press thermal interfacing on the left side
with hot iron).
2.
Sew darts into back panel, press towards center.
3.
Sew back center seam below zipper mark, press allowance apart. Tack zipper under
split edges, sew it from the right side.
4.
Sew front center seam, press allowance apart.
5.
Press pocket allowance into wrong side and sew it on the front right panel
according to marking. Work sides and lower edge of the flap, tuck and press it.
Sew the flap on front right panel above the pocket. Press downwards and
topstitch on 0.7 cm distance from edge.
6.
Sew side seams from the zipper mark down to slit marks.
7.
Sew side seams of facings.
8.
Work waistline with facings. Press allowance on facing and topstitch, tuck and
tack the open edge of facing. Fold facing ends under and sew to zipper
bands.
9.
Tack zippers under side split edges so that they open upwards and topstitch
along the edge.
10.
Fold gusset hem allowances under and topstitch. Put chocks on zippers bands and
side seam allowances right sides to left and topstitch closely to zipper
teeth.
11.
Turn over hem allowance along hemline, press and sew by
hand.