YOU
NEED: stretch denim of 150 ñm width; fusing;
zipper; 1 button; contrast knits for topstitching.
CUTTING:
FABRIC:
1.
Back panel – 2 details
2.
Front right panel - 1 detail
3.
Front left panel - 1 detail
4.
Back panel facing - 1 folded detail
5. Front right panel facing - 1 detail
6.
Front left panel facing - 1 detail
7.
Patch pocket - 2 details
8.
Belt loop – 6 details (10 ñm length and 3 ñm
width taking into account allowance)
9. Strengthener
– 1 folded detail
Fusing: facing details and strengthener.
INSTRUCTIONS:
Strengthen
the facings and strengthener with fusing (press thermal strengthener on the
left side with hot iron).
Sew
back panels darts and press them to center.
Sew
the central back seam together up to the cutting mark. Press it apart. Face and
topstitch the slit on 1 mm width from the edge.
Press the upper edge of the pocket upwards, fold the
edge inside on 1 0.5 mm and topstitch on 1 cm from the edge. Press pocket
allowance inside, coincide it with corresponding lines on the panels and
topstitch it on 1 mm.
Face
the central edges of front panels, fold them right sides inside and sew the
central seam from the fly front 3-4 cm downwards.
Zipper. Press the one-piece right panel
facing for zipper to wrong side on front central line, 1 cm from the edge at
left panel. Press strengthener along the center right side out, work open
edges. Topstitch zipper under closure allowance from left side to edge so that
teeth are closely to the bend. Lay strengthener with its bend to the center so
that worked edge hides zipper band. Pin closure split coinciding front center
lines. Topstitch free zipper band to closure right side facing; do not catch
front panel fabric. Topstitch front right panel along closure on the marking,
capturing facing and folding strengthener out. Stop stitching on 1.5-2 cm
before center seam. Then fold strengthener to its place and continue stitching
up to seam.
Fold
in center edge of right front panel and topstitch along the mark to left panel
overlapping topstitch the slit mark. Topstitch left side of slit.
Sew
front facings to back one along side edges. Press allowances out. Face the hem.
Fold
facings with upper edge right sides inside and work them. Fold them into right
side, sew short ends and topstitch the upper edge on 1 mm.
Press
hem over along hemline and topstitch it.
Work
a button hole into the right front panel. Sew button to left front panel.