YOU NEED:
Nylon of 150 ñm width;
companion lining of 150 ñm width;
polyester; zipper; 1 button; 2 studs; Velcro.
CUTTING:
Fabric:
1. Front panel
- 1 folded detail
2. Back panel -
2 details
3. Back yoke –
2 details
4. Front yoke –
1 folded detail
5. Pocket
facing – 1 detail
6. Lower part
of pocket – 1 detail
7. Upper part
of pocket – 1 detail
8. Flap – 2
details
9. Waistband –
1 detail
Lining:
10. Front panel
- 1 folded detail
11. Back panel
- 2 details
12. Pocket
facing– 1 detail
13. Lower part
of pocket – 1 detail
14. Upper part
of pocket – 1 detail
Polyester:
15. Front panel
- 1 folded detail
16. Back panel
- 2 details
17. Pocket
facing – 1 detail
18. Lower part
of pocket – 1 detail
19. Upper part
of pocket – 1 detail
20. Waistband –
1 detail
INSTRUCTIONS:
Topstitch
polyester details on corresponding lining details with rare stitch at 0.5 cm
distance from edge.
Sew front panel
and front yoke, press seam into yoke.
Sew pocket
lower and upper parts to fabric facing. Fold the pocket into right side. Sew
the flap and pocket lower main part right sides together. Fold into right side,
work and press.
Sew pocket
lining. Pull fabric pocket into lining and sew on upper edge. Do not sew lining
edge the flap will be sewn to. Fold pocket lining into the pocket; sew pocket
lower edge to pocket lower lining by hand.
Topstitch
pocket flap, Velcro on the marking, and pocket ribs.
Make upper stud
into the pocket and lower one into front panel.
Sew front panel to lining along the left side
seam down from the vent mark; topstitch the garment hem and right side seam up
to the mark. Cut side seams near marks, cut polyester out from seams, then fold
into right side. Work seams and corners, then press.
Sew yokes to
back panels, cut polyester out, press seams into yokes. Sew back center seam
(fabric) to the yoke, then cut polyester out and press seam apart.
Sew zipper into
back yoke.
Sew back center
lining seam up to the zipper mark. Cut polyester out and press the seam apart.
Sew back fabric
panel and lining one along left side seam from mark down to the vent. Topstitch
garment hem and sew right side seam upwards the vent up to the mark. Cut side
seams, cut polyester out of seams and fold into right side. Work seams and
corners, then press.
Fold lining
zipper allowance under and sew it to zipper band.
Sew front and
back panels right sides together (fabric seams), press seams apart. Fold the
garment so that lining details were right sides inside, then sew side seams.
Cut polyester out and press seams apart. Fold the skirt into right side.
Topstitch vent
on the front panel according to marking, topstitch Velcro.
Topstitch polyester
from wrong side of waistband. Fold the waistband along its center and sew short
ends. Tuck the waistband. From right side, make two holes for ties in
accordance with marking.
Fold ties along
the center and sew long and short edges. Fold into right side, work and press.
Pull ties into
holes and sew them from wrong side near side seam.
Sew waistband
and waistline right sides together. Cut polyester out of seam, press seam into
waistband. Fold under the seam allowance of the open waistband edge overlapping
the joining seam and topstitch closely along the edge.
Work button
hole and sew button in accordance with marking.