YOU NEED:
crepe-sateen of 150 cm width; lining; fusing; zipper.
CUTTING:
Fabric:
1. Back part – 2 pieces
2. Front side part –
2 pieces
3. Front part – 1
folded piece
4. Back panel – 2 pieces
5. Front panel – 1
folded piece
Trimming:
3. Collar – 4 pieces
Lining:
1. Back part – 2 pieces
2. Front side part –
2 pieces
3. Front – 1 folded piece
4. Back panel – 2 pieces
5. Front panel – 1
folded piece
INSTRUCTIONS:
1. Sew back details into fabric and lining.
2. Coincide collar
details right sides together and overstitch along upper, front, lower and inner
(from the nark to back middle seam) edges. Cease the allowance near the mark
and turn the collar right side out.
3. Sew relieve front
seams into fabric, inserting collar free lower edges. Sew front relieve seams into lining.
4. Sew fabric and
lining details along edges.
5. Coincide lining
and facing right side together and overstitch along upper edge. Turn the lining
and topstitch it on seam allowance at 1-2 mm from stitch.
6. Coincide collar
middle seam to back middle edge so that for a straight line, then fix with
several stitches. Press back middle seam allowances into wrong side, apply the
zipper under, and sew.
7. Sew side and
middle edges of skirt (lining and fabric). Sew fabric skirt to fabric upper
part; sew lining skirt to lining upper part. Press seam allowances apart, then
sew fabric and lining together.
8. Fold the hem under
so that lining hem is 2 cm shorter than this of fabric. Fix front seams close
to the mark and collar corners with several stitches.