YOU NEED: panne
velvet of 150 cm width; elastic lace, lining, fusing, a
zipper.
CUTTING:
ALL PANNE VELVET DETAILS MUST BE CUT OUT IN SAME DIRECTION (ALONG PILE
DIRECTION)!
Fabric:
1. Middle back part – 2 pieces
2. Side back part – 2 pieces
3. Middle front part – 2 pieces
4. Side front part – 2 pieces
7. Middle back panel – 2 pieces
8. Side back panel – 2 pieces
9. Side front panel – 2 pieces
10. Middle front panel – 1 folded piece
11. Back neckline facing – 2 pieces
12. Front neckline facing – 2 pieces
13. Back armhole facing – 2 pieces
14. Front armhole facing – 2 pieces
Lace:
5. Back insert – 2 pieces
6. Front insert – 1 folded piece
Lining:
1. Middle back part – 2 pieces
2. Side back part – 2 pieces
3. Middle front part – 2 pieces
4. Side front part – 2 pieces
Fusing: apply the fusing to wrong side of back neckline facing, front neckline facing, back armhole facing, front armhole facing.
INSTRUCTIONS:
1. Sew front/back relieve seams (fabric and lining). Tack lining and fabric
details wrong sides together, and process as the single detail. Sew
side/shoulder seams.
2. Sew side edges of lace inserts. Sew insert upper edges to lower edges
of dress upper part right sides together. Press allowances upwards and slash
middle front insert allowance.
3. Sew relieve/side seams of skirt. Sew middle back seam between hem and
mark. Sew the skirt to lace insert’s lower edge, press allowances towards the
skirt.
4. Press closure slit allowance to wrong side, sew the zipper under slit
edges.
5. Sew neckline facings together. Sew armhole facings together. Sew
facings to garment right sides together. Fold facings out and topstitch on
joining seam allowance at 1-2 mm from the seam; then press. Fold free edges of
back neckline facings under and sew them to zipper braid. Fold lower ends of
front neckline facing under and sew them to seam joining the insert.
6. Press
hem allowance to wrong side and sew with blind stitches.