FABRIC: natural or artificial satin, silk.
YOU WILL ALSO NEED: waist elastic.
IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED.
IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150 cm) to find out how much material you need (do not forget about double and symmetric pieces).
WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE MATCHING!
1. Back - 2 pieces
2. Front - 2 pieces
1. Stitch the leg seams to make two separate legs and press them open.
2. Turn one leg right side out and place it inside the other leg. Stitch the crotch seam leaving a slit in the seam above the along the marked waist foldline.
3. Fold the raw to edge of the garment for 0, 5 cm. under and press it flat.
Fold the waist integrated facing to the wrong side and topstitch it 0.1 cm
above the lower folded edge. Topstitch the waist fashion line 0.1 cm. below
the line. Cut a piece of elastic to fit the waist, plus 2,5 cm.
Thread the elastic through the casing. Overlap and stitch the elastic ends.
4. Fold hem and slit seam allowances to the wrong side of the garment for 0,5 cm. Fold the raw edges under to hide them. Stitch them in place.