MATERIAL: crinkle chiffon.
YOU NEED: clue interfacing; 5 buttons.
IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM
ALLOWANCE IS PROVIDED,
IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM
ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE: 1 cm for all seams.
ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150
cm) to find out how much material you need (do not forget about double and
symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING
CUTTING:
Fabric:
1. Front part - 2 details
2. Back part – 1 detail
3. Sleeve - 2 details
4. Collar – 2
details
5. Stand-up
collar – 2 details
Clue interfacing: placket, outer collar, stand-up collar.
INSTRUCTIONS:
Press each stitched seam, then oversew and press again.
1. Strengthen
the placket, outer collar, cuffs and stand-up collar with clue interfacing
2. Sew bust darts into front part and topstitch them.
3. Sew shoulder seams, then
topstitch,
4. Sew sleeves into armholes,
then topstitch seams.
5. Oversew
separately side edges 15 cm from the hem, then sew
downward to notch marks.
6. Press sleeve hem
allowance in double into wrong side at 3 cm width. Topstitch it on foot width.
Press sleeve hem allowance into wrong side again. Topstitch lower edge of the
fold also on foot width.
7. Face the placket.
8. Stitch the inner collar
with outer one. Turn collar right side out and topstitch.
9. Sew stand-ups, with the
collar between them.
10. Sew inner stand-up (with the collar) to
the neckline, fold the outer stand-up open edge under and topstitch along the
seam of inner stand-up.
11. Press hem allowance to
left, then topstitch. Press and topstitch slit allowances.
12. Make button holes into right (overlap) part and sew buttons to the left
(underlap) one.