CLASSICAL BLOUSE

MATERIAL: cotton stretch fabric.

YOU NEED: clue interfacing; 7 buttons.

IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,

IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.

SEAM ALLOWANCE: 1 cm for all seams.

ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150 cm) to find out how much material you need (do not forget about double and symmetric details).

WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!

CUTTING:

Fabric:

1. Front part - 2 details

2. Back part – 1 detail

3. Collar – 2 details

4. Stand-up collar – 2 details

5. Sleeve - 2 details

6. Cuff – 2 details

Clue interfacing: panel, upper (outer) collar, stand-up collar, cuff.

INSTRUCTIONS:

1. Strengthen the планку, outer collar, stand-up collar and cuffs with clue interfacing.

2. Sew darts into front part. Sew waist darts into back part.

3. Sew shoulder seams.

4. Oversew sleeve edges separately p to notch marking.

5. Sew sleeves into armhole, fitting them around the cap.

6. Sew sleeve seams and side seams with single stitch.

7. Oversew inner edge of each placket.

8. Overstitch inner collar with outer one. Turn the collar right side out.

9. Sew stand-ups, with the collar between them.

10. Sew inner stand-up (with the collar) to the neckline, fold the outer stand-up open edge under and topstitch along the seam of inner stand-up. Make decorative topstitch along the collar.

11. Overstitch side edges of cuffs and turn them right side out.

12. Sew outer one-piece cuffs to the lower edge of the sleeve. Topstitch inner one-piece cuffs on.

13. Make decorative stitch along side and lower sides of cuffs.

14. Press under and topstitch the garment hem.

15. Make button holes into right (overlap) part and sew buttons to left (underlap) one.