MATERIAL: silk or viscose.
YOU NEED: clue interfacing; 5 buttons.
IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM
ALLOWANCE IS PROVIDED,
IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM
ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE:
1 cm for all seams.
ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150
cm) to find out how much material you need (do not forget about double and
symmetric details).
WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fabric:
1. Front part - 2 details
2. Left edge facing stole – 1 detail
3. Back part - 1 detail
4. Front band - 2 details
5. Sleeve - 2 details
6. Collar - 2 details
7. Left ruffle
– 2 details
8. Right ruffle
– 2 details
9. Cuff – 2
details
Clue interfacing: front band, upper collar, cuffs.
INSTRUCTIONS:
1. Strengthen front band, upper collar and cuffs with clue interfacing.
2. Sew vertical darts into front part and back part.
3. Sean shoulder seams.
4. Sew side
seams.
5. Sew ruffles to outer
collar. Sew ruffles to inner collar. Overstitch inner collar with outer one,
with ruffles. Turn the collar (with ruffles) right side out and press.
6. Overstitch upper corner
of stole and turn it out.
7. Sew by hand a ruffle to
right front part. Then sew by and a ruffle and prepared stole to left front
part.
8. Oversew
inner edges of front bands.
9. Overstitch right front
part with front band. Make a notch into the outer collar and bend it back. Sew
inner collar and back part neckline, again make a notch into outer collar and
overstitch the left front part with front band.
10. Fold under
outer collar open edge and topstitch into inner collar joining seam.
11. Sew sleeve seams.
12. Sew sleeves into,
fitting them along the cap.
13. Oversew
sleeve and garment hem allowances, them press into wring side and topstitch.
14. Sew buttons to left
front part.