MATERIAL: lace knitted fabric, mixed fabric (for
working).
YOU NEED: clue interfacing; 6 buttons.
IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM
ALLOWANCE IS PROVIDED,
IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM
ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE:
1 cm for all seams.
ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150 cm)
to find out how much material you need (do not forget about double and
symmetric details).
WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fabric:
1. Front part - 2 details
2. Back part - 1 detail
3. Front part facing - 2 details
4. Sleeve - 2 details
5. Cuff - 2 details
6. Back neckline facing – 2 details
Clue interfacing: front part facing, cuff, back neckline facing.
OUR ADVICE: To make the
fabric along stitched seams stretch, sew details with narrow zigzag or with
special stretchable stitches. To make the hem stretch, oversew
hem allowance with special oversew stitches (overlock), and then sew it using double needle. This is
also attachable to other edges that should stay elastic.
These recommendations are not for industry.
INSTRUCTIONS:
1. Strengthen
the front part facing, cuffs and back neckline facing with clue interfacing.
2. Stitch back neckline
facings to shoulder edges of front part facings.
3. Oversew
inner edge of front part facing and back neckline facing.
4. Sew shoulder seams,
inserting selvedge.
5. Sew front part facing and
back neckline facing to edge. Overstitch front/back part necklines with facing.
Turn front part facing and back neckline facing into right side. Topstitch back
neckline and front part facings.
6. Sew side
seams.
7. Sew sleeve seams.
8. Fold cuffs
right sides together. Sew short ends into ring. Make a notch into allowance
(near split), with slit in the seam center. Fold cuffs right sides together,
stitch edges.
9. Stitch cuffs
to sleeve lower edge and oversew upper edge of the
cuffs, with the sleeve.
10. Topstitch
cuff-to-sleeve joining seam, them make decorative stitch along lower part of
the cuff and along slits edge.
11. Sew sleeves into armhole,
fitting along caps.
12. Press hem allowance into
wrong side and topstitch.
13. Work button holes into
right front part and sew buttons to left one.