RAGLAN BLOUSE WITH FLARE SLEEVES

MATERIAL: chiffon (natural silk, polyester).

IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,

IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.

SEAM ALLOWANCE: 1 cm for all seams.

ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150 cm) to find out how much material you need (do not forget about double and symmetric details).

WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!

CUTTING:

Fabric:

1. Front part - 1 detail

2. Back part - 1 detail

3. Sleeve - 2 details

4. Wide ruffle - 2 details

5. Narrow ruffle – 2 details

Cut pipings of 0.5 cm width by diagonal.

INSTRUCTIONS:

1. Sew vertical darts into front and back parts.

2. Sew wide and narrow ruffles to sleeve hem.

3. Sew sleeve seams.

4. Sew side seams.

5. Sew sleeves into arm holes.

6. Fold piping for figure neckline along the center and press. Sew folded pipings to edges of figure neckline; piping bent should be on the garment on 0.75 cm width. Cut seam allowances to 0.5 cm width. Turn pipings into wrong side, then topstitch the blouse along figure neckline.

7. Fold under and topstitch front/back neckline edges, with drawstring loop unstitched.

8. Prepare the string and pull it into neckline loop.

9. Press sleeves and blouse hems to the wring side and topstitch.