MATERIAL: elastic velvet.
YOU NEED: clue interfacing; 7 buttons.
IF THE PATTERNS HAVE DOUBLE
CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS HAVE SINGLE
CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE: 1 cm for all seams.
ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150
cm) to find out how much material you need (do not forget about double and
symmetric details).
WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE
COINCIDING!
CUTTING:
Fabric:
1. Back yoke – 1 detail
2. Center
back part – 1 detail
3. Side back part - 2 details
4. Lower back part - 2 details
5. Front
yoke – 2 details
6. Side front part – 2 details
7. Middle front part – 2 details
8. Center front part – 4 details
9. Center-side front part – 2 details
10. Sleeve
– 2 details
11. Cuff –
2 details
12. Flap –
4 details
13. Upper pocket bag – 4 details
Clue
interfacing: front band, cuff, flap.
INSTRUCTIONS:
1. Strengthen the upper
center front band, cuff and the flap with clue interfacing
2. Sew
center-side front part to side front part. Sew side front part to center-side
front part. Make decorative double stitch on 0.2 cm from joining seam.
3. Fold
the flap and under-flap detail wrong side together, then
overstitch along the outer contour. Cut the allowance of flap corners and turn
out. Make decorative double stitch along flap outer contour on 0.2 cm from the
edge. Coincide flap open edges and yoke edges (flap on front yoke right part),
fold upper pocket part bag on the flap, then tack. Coincide lower part of the
bag and lower front part right side. Sew flap and the bag. Sew the yoke to the
front part. Turn the bag inside, then equalize and topstitch. Tack the bag
along the outer contour and topstitch the bag on the front part. Cut the seam
near the pocket. Press the joining seam into the yoked, then topstitch.
4. Sew
side back part to center back part. Sew the yoke to the back part. Make
decorative double stitch on 0.2 cm from joining seam.
5. Sew
shoulder and side edges.
6. Sew
collar center seam on the upper center front part and lower front part. Sew
side edges of center lower front part and lower back part. Sew side edges of
upper front part and upper lower back part. Oversew
inner edge of center upper front part with lower back part.
7. Sew
center lower front part and lower back part to front and back parts, at the
same time sewing one-piece collar to neckline, coinciding notches.
8. Fold center upper front part and back lower part right
sides together with central front lower part, then pin them to edges one-piece
with the collar. Pin edges of outer and inner collar. Overstitch edges
along the edge and the collar.
9. Turn upper front part and lower back part into wrong side. Oversew and press edges. Make double decorative stitch along
the edge and the collar on0.2 cm front the edge. Topstitch one-piece outer
collar with center front part on 0.2 cm from center lower front part-lower back
part joining seam.
10. Mark sleeve notch length and sew sleeve seas. Press lower cuff upper edge on 1 cm. Fold the cuff along
the center and overstitch cuff side edges. Cut corner seam allowances and turn
the cuff right side out.
11. Sew upper cuff to sleeve lower edge, then
topstitch the lower cuff.
12. Sew sleeves into the
armhole according to notches.
13. Oversew buttonholes into the flap and the
cuff, then sew buttons. Wok buttonholes into the right front part, and sew
buttons to the left one.