MATERIAL: low nap faux fur.
YOU NEED: 6 hooks; lining.
IF THE PATTERNS HAVE DOUBLE
CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS HAVE SINGLE
CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE: 1 cm for all seams.
ATTENTION! Before sewing, print paper patterns and lay them out
according to the linen width (from 90 to 150 cm) to find out how much material
you need (do not forget about double and symmetric details).
WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE
COINCIDING!
CUTTING:
Fabric:
1. Back part – 1 detail
2. Front part – 2 details
3. Front
band – 2 details
4. Inner
collar – 1 detail
5. Outer
collar trim – 1 detail
6. Outer
collar – 1 detail
5. Upper
sleeve – 2 details
6. Lower
sleeve – 2 details
Lining:
1. Back
part – 1 detail
2. Front part - 2 details
3. Upper
sleeve – 2 details
4. Lower
sleeve – 2 details
INSTRUCTIONS:
1. Sew outer collar trim to
the collar.
2. Fold the
outer collar with inner one right sides together, then overstitch inner collar
with outer one. Turn the
collar right side out, then fit the edging from outer collar.
3. Sew
bust dart into the front part.
4. Fold the drawstring lining stripe with fabric garment wrong side
according to marking, turn out the lower end of the stripe. Tack the stripe
with garment, then topstitch along marking.
5. Fold front band and front part right
sides together, then overstitch along the edge, on the right side of front part
upward to the notch marking ends of collar sewing-in. Sew front band lower
edges to front part strictly along the marked line of hem folding-under. Turn
edges right side out, then fit seams.
6. Sew shoulder
seams. Sew side seams, with holes for string unsewn.
7. Sew the
inner collar with the neckline, then sew inner collar to front bands.
8. Sew
sleeve dart. Sew sleeve front seam.
9. Fold the drawstring lining stripe with fabric garment sleeve wrong
side according to marking, turn out the lower end of the stripe. Tack the sides
to garment sleeves, then topstitch along marking.
10. Sew
edge sleeve seam, with the string hole unsewn.
11. Sew sleeves into
armholes according to notches. Sew sleeve pads and sleeve heads into.
12. Mark hooks places
on the wring side. Make holes (with a special instrument) for hooks and eyes.
Insert hooks (or eyes) into the holes; pull board pieces of 40-50 mm into hook
rings (or eye). Sew hooks (or eyes) to front band through rings, then fix
pulled into the hook ends of the board.
13. Sew lining sleeve
seams, then sew the sleeves into. Oversew lining seams, hem upward the waist.
Press the lining. Sew the lining to front band and outer collar inner edges.
Sew collar joining seam allowances. Turn lining sleeves under and sew to
garment hem turning-under, turn the extra lining into the wrong side and press.
Turn the coat right side out through unsewn hem. Cut the hem, then turn it
under and topstitch, so that the lining was 1 cm shorter than the fabric
garment. Turn the hem and sew by hand.
14. Trim
the string into the drawstring. Gather the fabric with ties, then trim the
gathering, gather ends of the string.