FABRIC: silk or viscose fabric.
YOU WILL ALSO NEED: zip, lace braid and iron-on interfacing.
SEAM ALLOWANCES: 1 ñì for all seams.
IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM
ALLOWANCE IS PROVIDED,
IF THE PATTERNS HAVE SINGLE
CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
ATTENTION! Before sewing, print paper patterns and lay them out
according to the linen width (from 90 to 150 cm) to find out how much material
you need (do not forget about double and symmetric pieces).
WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE
MATCHING!
CUTTING:
FABRIC:
1. Left
back panel – 1 piece
2. Right
back panel – 1 piece
3. Front panel – 1 piece
4. Front facing – 1 piece
5. Back facing – 2 pieces
6. Flounce – 1 piece
7. Small flounce – 1 piece
INTERFACING:
front/back facing.
INSTRUCTIONS:
1. Apply the interfacing to
the wrong side of the front facing and the back facing.
2. Stitch the front/back darts; press them
towards the front/back centre.
3. Neaten the back centre edges; stitch the
back centre seam up to the zipper notches. Press the seam open.
4. Neaten the front and the back lower edges.
Topstitch the lace braid upper edge to the front and the back lower fashion
seamline.
5. Neaten the skirt side edges; stitch the side
seams; press the seams open.
6. Neaten the flounce upper and side edges; put
the flounces under the lace braid and topstitch them to the garment.
7. Stitch the front and the back facing
together; pres the seams open. Neaten the facing lower edge.
8. Insert
the zip. With the facing uppermost, stitch the facing to the skirt waist edge.
Topstitch the seam allowances to the facing 0,2 cm from the seam. Fold the
facing centre edges under and slipstitch them to the zip tape.
9. Neaten the flounce lower edges; press the
seam allowances under and topstitch.