FABRIC: lightweight wool or viscose
fabric.
YOU WILL
ALSO NEED: zip, eyelets, decorative cord
and
iron-on interfacing.
SEAM ALLOWANCES: 1 ñì for all seams.
IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM
ALLOWANCE IS PROVIDED,
IF THE PATTERNS HAVE SINGLE
CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
ATTENTION! Before sewing, print paper patterns and lay them out
according to the linen width (from 90 to 150 cm) to find out how much material
you need (do not forget about double and symmetric pieces).
WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE
MATCHING!
CUTTING:
FABRIC:
1. Front
panel – 1 piece
2. Front
facing – 1 piece
3. Front flounce 1 – 1 piece
4. Front flounce 2 – 1 piece
5. Lowe front panel– 1 piece
6. Back panel – 1 piece
7. Back flounce 1 – 1 piece
8. Back facing – 1 piece
9. Lower back panel – 1
piece
10. Back flounce 2 – 1 piece
INTERFACING:
front/back facing.
INSTRUCTIONS:
1. Apply the interfacing to the wrong side of the front facing and the back facing.
2. Neaten the front/back panel side edges;
stitch the side seams leaving a zipper opening in the left seam; press the
seams open.
3. Neaten the lower panel side edges. Neaten
the side edges of the flounces. Stitch the side seams; press the seams open.
4. With side seams matching, stitch the skirt
lower panel to the skirt, sandwiching the flounce 1 between them; neaten the
seam; press the seam allowances upwards.
5. Stitch the flounce 2 to the skirt lower
panel; neaten the seam; press the seam allowances upwards.
6. Stitch the front and the back facing
together; pres the seams open. Neaten the facing lower raw edge.
7. Insert the zip. With the
facing uppermost, stitch the facing to the skirt waist edge. Topstitch the seam
allowances to the facing 0,2 cm from the seam. Fold the facing side edges under
and slipstitch them to the zip tape.
8. Neaten the flounce lower edges; press the
seam allowances under; topstitch.
9. Insert eyelets; put cord through the
eyelets.