YOU NEED: denim, fusing, zipper.
IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM
ALLOWANCE IS PROVIDED,
IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM
ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE: 1 cm for all seams, 2 cm for hem.
ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150
cm) to find out how much material you need (do not forget about double and
symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fabric:
1. Rhombic
insert – 2 pieces
2. Rhombic
insert_2 – 2 pieces
3. Rhombic
insert_3 – 2 pieces
4. Rhombic
insert_4 – 2 pieces
5. Rhombic
insert_5 – 2 pieces
6. Rhombic insert_6 – 2 pieces
7. Rhombic insert_7 – 2 pieces
8. Rhombic insert_8 – 2 pieces
9. Rhombic insert_9 – 2 pieces
10. Pocket – 1 piece
11. Facing – 2 pieces
Fusing: facing.
INSTRUCTIONS:
1. Apply
the fusing to wrong side of facings.
2. Neaten
pocket outer contour. Press pocket upper edge and topstitch on the pocket.
Press side and lower edges of pocket, according to pattern.
3. Sew
back panel rhombic inserts, according to model. Neaten seams and press them.
Make decorative stitch at 0.5 cm from joining seams. Cut extra allowances.
4. Sew
front panel rhombic inserts, according to model. Neaten seams and press them.
Make decorative stitch at 0.5 cm from joining seams. Cut extra allowances.
5. Neaten
side edges. Sew side seams up to closure notch. Press seams apart and
press closure slit. Sew the zipper in.
6. Sew
side edge of back facing and front facing, them press it apart. Neaten outer
edge of facing.
7. Lay
facings on garment upper edge, right sides together, then
overstitch. Topstitch overstitching seam on facings at 0.2 cm from
overstitching seam. Turn facings to wrong side and press upper ready edge of
garment. Fold side edges of front facing and back facing and sew them to zipper
by hand.
8. Neaten
the hem. Press it under and topstitch.