5451 TROUSERS WITH CORD
YOU NEED: wool, fusing, zipper, hook, eye.
IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM
ALLOWANCE IS PROVIDED,
IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE
IS NOT PROVIDED.
SEAM ALLOWANCE: 1 cm for all seams.
ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150
cm) to find out how much material you need (do not forget about double and
symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
1. Button catch –
1 piece
2. Front part – 2 pieces
3. Back part – 2 pieces
4. Waistband – 1 piece
INSTRUCTIONS:
1. Apply the fusing
to wrong side of waistband and button catch.
2. Sew front/back
darts. Press front darts into front center. Press back darts into back center.
3. Neaten: edges
of back side part and front part, side leg edges of front part and back part;
front edge and middle edge. Sew side seams of front/back parts. Press seams
apart.
4. Sew side leg
seam and press it apart. Sew front edge and middle edge to closure notch. Make
another stitch on side leg seam, close to seam of joining front and middle
seam.
5. Press closure one-piece facings into wrong side.
Sew the zipper under closure slit allowance (left edge). Sew zipper free braid
to right one-piece facing. Fold button catch along the center and overstitch
lower short edge. Topstitch closure one-piece facing on button catch at left
edge. Topstitch slit right edge catching facing.
6. Make
buttonholes into waistband. Press the waistband along the center, wrong side
inside, and neaten lower inner edge of waistband.
7. Turn ends of cords under. Fold cords along the
center and make stitch at 0.7 cm from bending. Turn cords right side out and
press them. Sew ends.
8. Sew the
waistband to garment upper edge. Neaten waistband ends, slash allowances in
corners, then turn tight side out. Topstitch waistband
lower ready edge on joining seam, then press ready waistband. Pull the cord
into waistband.
9. Press the hem
under and topstitch.
10. Sew hook on
waistband right ends, sew the loop on left one.