YOU NEED: denim, fusing, zipper.
IF THE PATTERNS HAVE DOUBLE CONTOUR,
THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM
ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE: 1 cm for all seams, 2 cm for hem.
ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150
cm) to find out how much material you need (do not forget about double and
symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fabric:
1. Pocket
– 2 pieces
2. Flap –
4 pieces
3. Back
panel – 1 piece
4. Front panel – 1 piece
5. Front yoke – 2 pieces
6. Back yoke – 2 pieces
7. Belt loop – 1 piece
Fusing:
front/back yokes.
INSTRUCTIONS:
1. Apply
the fusing to wrong side of front/back yokes.
2. Neaten
side edges of front/back panels. Sew right side seam and press it apart. Neaten
the hem. Press hem allowance to wrong side.
3. Make
and press pleats into front/back panels. Topstitch pleats at 1 from upper edge.
4. Neaten
left side edge of outer yokes. Sew right side seam of inner/outer yokes. Neaten
lower edge of inner yokes.
5. Lay flaps right sides together and overstitch.
Slash allowance of flap rounded corners and turn right side out. Make
decorative stitch along outer contour of flaps at 0.5
cm from edge. Neaten flap upper edge.
6. Neaten pocket
outer contour and press it according to pattern. Topstitch upper edge on the
pocket and mark pocket place on front part. Topstitch the pocket along the
contour at 0.2 cm from pocket edge. Topstitch the flap along marking. Fold the
flap to right side and topstitch at 0.5 cm from seam.
7. Sew
outer yokes to the garment coinciding side seams. Lay yokes right sides
together and overstitch yoke upper edges. Topstitch overstitching on lower yoke
at 0.2 cm from overstitching seam. Fold yokes to wrong side and press ready
upper edge of yoke.
8. Sew left side seam up to closure notch. Press closure slits and sew the zipper in caching yokes side edges. Topstitch lower yoke along seam joining upper yokes. Topstitch the hem.
9. Fold belt loops along the center, right sides
together, coinciding edges, and overstitch it at 0.5-0.7 cm from edges. Turn
right side out placing the seam at fold or make edging of 0.1-0.2 cm width to
wrong side, and press it. Cut belt loops and topstitch according to marks.