5459 CROPPED TROUSERS

YOU NEED: elastic denim, fusing, 1 zipper, 2 buttons, cotton lining.

IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,

IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.

SEAM ALLOWANCE: 1 cm for all seams, 3 cm for hem.

ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150 cm) to find out how much material you need (do not forget about double and symmetric details).

WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!

CUTTING:

Fabric:

1. Right front facing – 2 details

2. Left front facing – 2 details

3. Back facing – 2 details

4. Front part – 2 details

5. Side front part – 2 details

6. Back part – 2 details

7. Belt loops – 1 detail

8. Button catch – 1 detail

Lining:

1. Back sacking – 2 details

2. Large sacking – 2 details

Fusing: right/left front facings, back facing, button catch.

INSTRUCTIONS:

1. Apply the fusing to wrong side of back facing, right/left front facings and button catch.

2. Topstitch to form a crisp crease line into front part. Sew side edges of front facing and back facing. Press side seams apart.

3. Sew back darts.

4. Lay large sacking on garment front part right sides together and overstitch pocket entrance. Topstitch overstitching at 0.2 cm on large sacking of front pocket, and press. Stitch small sacking to side front part. Lay front part to marking on side front part (pocket entrance). Fix side front part to front part along upper edge and side edge with 1 cm stitch. Sew sackings together and neaten them.

5. Neaten side edge of back/front parts, inside leg edges of front/back parts, front edge and middle edge of trousers. Sew side edges of front part and back part together. Press side seams apart.

6. Sew inside leg seams and press them apart. Sew front edge to back edge up to closure notch. Make another stitch along inside leg seam close to front-middle seam.

7. Press closure one-piece facings to wrong side. Sew the zipper under closure left allowance along the edge. Sew zipper free braid on right one-piece facing. Fold button catch along the center and overstitch lower short edge. Topstitch closure one-piece facing on button catch on trousers left part. Topstitch slit right edge catching facing.

8. Lay facing details right sides together and overstitch upper edge. Topstitch overstitching on lower facing at 0.2 cm from overstitching, stopping at 3 cm before end. Fold yokes to wrong side and press them.

9. Fold the loop belt along the center and overstitch at 0.5-0.7 cm from edges. Turn the detail right side out, placing seam at fold or make edging of 0.1-0.2 cm width into wrong side, and press.

10. Neaten upper edge of lower facings. Cut belt loops of proper size and mark place to sew them. Sew belt loops to facings lower edges. Sew facings to garment upper edge coinciding side seams. Overstitch facing corners. Slash allowances in corners, turn them right side out and press them. Topstitch facing neatened edge along joining seam.

11. Neaten hems allowance and press it to wrong side. Topstitch hems. Make buttonholes into right facing, sew buttons on left one.