5461 SARAFAN WITH SHAPED RELIEVE

YOU NEED: sheer flax; fusing; 12 buttons; piping.

IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,

IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.

SEAM ALLOWANCE: 1 cm for all seams.

ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150 cm) to find out how much material you need (do not forget about double and symmetric details).

WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!

CUTTING:

Fabric:

1. Side front part – 2 pieces

2. Front part – 1 piece

3. Triangle gusset – 2 pieces

4. Back part – 2 pieces

5. Placket – 4 pieces

Fusing: placket.

INSTRUCTIONS:

1. Apply the fusing to wrong side of placket.

2. Lay placket details together and overstitch placket outer edge. Topstitch overstitching allowance on placket at 0.2 cm from seam. Neaten placket outer edge.

3. Sew the placket to front part. Topstitched placket neatened edge along seam joining the placket. Press ready placket.

4. Sew triangle gusset to front part. Neaten joining seam and press frontward.

5. Neaten lower edge of front lower part. Press allowance and topstitch at 0.5 from lower edge.

6. Make buttonholes into placket. Fix front part and side front part along side seam and along front neckline edge.

7. Neaten back middle edge. Sew back middle seam and press it apart. Sew side edges of garment and neaten them. Press side seam backwards.

8. Press the piping along the center and overstitch edges of: front/back neckline, front/back armholes.

9. Sew shoulder seams and press backwards. Neaten the hem, press it under and topstitch. Sew buttons.