5483 ZIP-UP JACKET

YOU NEED: suedette, 4 separable zippers.

IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,

IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.

SEAM ALLOWANCE: 1 cm for all seams, 2 cm for garment/sleeves hems.

ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150 cm) to find out how much material you need (do not forget about double and symmetric details).

WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!

CUTTING:

Facing:

1. Back sleeve – 2 pieces

2. Front sleeve – 2 pieces

3. Center back part – 1 piece

4. Side back part – 2 pieces

5. Side front part – 2 pieces

6. Center front part – 2 pieces

INSTRUCTIONS:

1. Sew back relieves and press them apart.

2. Sew the zipper to sleeve upper edge. Press joining seams. Fold sleeve hem under and pres it. Make decorative stitch at 0.5 cm along zipper catching garment hem. Sew sleeve lower edge and press apart. Topstitch sleeve hem.

3. Sew the zipper to side/center front part allowances. Press joining seam. Mark center front part edge under. Topstitch garment hem.

4. Sew jacket side edges and press them apart. Sew sleeves into armholes. Press garment hem under and topstitch. Make decorative stitch at 0.5 cm along zipper.

5. Make decorative stitch at 0.2 cm from front/back neckline edge.