YOU NEED:
fabric suitable for blouse (with elastic yarns), piping.
IF THE PATTERNS
HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS
HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE:
1 cm for all seams, 0 cm form garment/sleeve hems, 0 cm for sleeve upper edges
and front/back neckline edges, 0 cm for shaped neckline.
ATTENTION! Before sewing,
print paper patterns and lay them out according to the linen width (from 90 to
150 cm) to find out how much material you need (do not forget about double and
symmetric details).
WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE
COINCIDING!
CUTTING:
Fabric:
1. Sleeve – 2 pieces
2. Front part – 1 piece
3. Back part – 1 piece
INSTRUCTIONS:
1. Stitch bust
darts. Press darts downwards.
2. Neaten
garment side edges. Stitch side seams downwards slit notch. Press side seams
apart, press slits. Make decorative stitch along slits at 0.5 cm from the edge.
3. Stitch sleeve seams and
neaten them. Press sleeve seams backwards.
4. Stitch sleeves into
armholes.
5. Make easy stitches along front/back necklines at
0.5 cm from edge. Fit the garment and pull detail’s upper edge up to necessary
size steadily.
6. Press the piping along
the center. Trim shaped front neckline and front/back necklines with the
piping, leaving it as ties.
7. Neaten garment’s hem and
sleeves hem.