5504 ¾
TROUSERS
YOU NEED: natural fabric with elastic yarns; elastic
braid, zipper, fusing; a button.
IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM
ALLOWANCE IS PROVIDED,
IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM
ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE: 1 cm for all seams, 2 cm for hem.
ATTENTION! Before sewing, print paper patterns and lay them out
according to the linen width (from 90 to 150 cm) to find out how much material
you need (do not forget about double and symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fabric:
1. Cut side front part – 2 pieces
2. Center front part – 2 pieces
3. Side front part – 2 pieces
4. Button catch – 1 piece
5. Patch pocket – 2 pieces
6. Flap – 4 pieces
7. Center back part – 2 pieces
8. Side back part – 2 pieces
9. Waistband – 1 piece
10. Belt loop – 8 pieces
Lining:
1. Pocket – 2
pieces
Fusing:
waistband, button catch, flap.
INSTRUCTIONS:
1. Apply the fusing to wrong side of waistband, flap, button catch.
2. Lay pocket
lining on center front part right side together, and overstitch pocket
entrance. Fold the lining out into wrong side. Make decorative stitch along
pocket entrance at 0.5 cm from edge. Lay center front part to side front part
marking (pocket entrance). Fix side front part to center front part along
upper/side edge with 1 cm stitch. Stitch pocket lining and neaten it.
3. Stitch back
darts. Press darts towards back center.
4. Stitch
front relieve seam and neaten it. Press the seam towards front center and make
decorative stitch at 0.5 cm from seam.
5. Stitch
back relieve seam and neaten it. Press the seam towards back center and make
decorative stitch at 0.5 cm from seam.
6. Lay flap
details right sides together and overstitch them. Cut allowances into corners
and turn them right side out. Make decorative stitch along flap outer corner at
0.5 cm from edge and neaten flap upper edge.
7. Neaten garment
side. Stitch garment side seam and press it apart.
8. Neaten pocket
outer contour and press it according to pattern. Topstitch upper edge on the
pocket and topstitch the pocket along the contour at 0.2 cm from pocket edge.
Topstitch the flap on the pocket. Fold the flap into right side and topstitch
it at 0.5 cm from the seam.
9. Neaten
inner/outer leg seams, middle and lower edge of garment. Stitch inner leg seams
and press them apart. Stitch front/middle edges up to closure notch. Make
another stitch along crotch seam close to the seam joining front seam and
middle seam.
10. Press
one-piece facings of closure into wrong side. Stitch the zipper under closure
allowance left edge. Stitch zipper free braid to one-piece right edge. Neaten
button catch side edge. Fold button catch along the center and overstitch short
lower edge. Topstitch one-piece closure facing on button catch left edge.
Topstitch slit right edge catching the facing.
11. Lay belt loop details right sides together leaving
upper edge free. Turn belt loops right side out and pres them.
12. Press the waistband along the center, right side
out, and neaten waistband lower inner edge.
13. Stitch the
waistband to garment upper edge. Overstitch waistband ends, cut seam allowances
into corners and turn them out. Cut elastic braid and topstitch pieces
vertically on waistband. Topstitch waistband lower neatened edge on joining
seam and press ready waistband. Topstitch belt loops on waistband upper edge.
Sew belt loops on garment.
14. Press hem
allowance into wrong side and topstitch.
15. Neaten belt
loops into waistband right edge, sew the button on left edge.