YOU NEED: fabric suitable for suit, fusing, 6 buttons.
IF THE PATTERNS
HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS
HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE:
1 cm for all seams, 3 cm for all hems.
ATTENTION! Before sewing,
print paper patterns and lay them out according to the linen width (from 90 to
150 cm) to find out how much material you need (do not forget about double and
symmetric details).
WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE
COINCIDING!
CUTTING:
Fabric:
1. Back center
part – 2 pieces
2. Side back
part – 2 pieces
3. Inner collar
– 1 piece
4. Outer collar
– 1 piece
5. Side front part – 2 pieces
6. Center front part – 2 pieces
7. Front band – 2 pieces
8. Back neckline facing – 1 piece
9. Sleeve – 2 pieces
10. Half-belt – 4 pieces
Fusing: front band, back neckline facing, outer collar.
INSTRUCTIONS:
1. Apply the fusing to wrong side of front band, back neckline facing,
outer collar.
2.
Stitch back darts. Press darts towards back center. Stitch front dart and
neaten it. Press front dart towards front center. Stitch front relieve seams
and neaten them. Stitch back relieve seams and neaten them. Press front relieve
seams towards front center, press back relieve seams towards back center.
3.
Stitch back middle seam and neaten it. Press middle seam towards right back
part.
4. Lay collar
details together and overstitch them along the contour. Slash collar corners
and turn them right side out. Press the collar.
5. Pin front band on front part right sides together and overstitch them
along edging (at front part side up to the notch determining edge of collar
stitching in). Stitch front bands’ lower edges to center front part along
marked hem line. Cut edging upper/lower corners. Turn edgings right side our
and press it.
6. Neaten garment side edges and stitch them to slit notch. Press side
seams apart, press slits. Make decorative stitch at 0.5 cm from slit edge. Stitch garment shoulder and neaten them. Press
shoulder seams backwards.
7. Stitch
shoulder edges of facing and front band and press them apart. Neaten outer edge
of facing and front band.
8. Press joining collar seams’ allowance apart and fix
them close to seams. Stitch inner collar into garment neckline.
9. Lay half-belt details right sides together and
overstitch them along the contour leaving half-belt lower edge to turn it right
side out. Turn half-belt right side out and press it. Make a buttonhole into
half-belt. Stitch the half-belt on the sleeve.
10. Stitch sleeve seam and neaten it. Press sleeve
seam. Stitch sleeves into armholes according to notches. Neaten sleeve hem,
fold it under and topstitch.
11. Make buttonholes into right edging, sew buttons on left one. Sew
buttons on sleeves.