YOU NEED: natural/mixed chiffon, zipper, 2 buttons, fusing.
IF THE PATTERNS
HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS
HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE:
1 cm for all seams.
ATTENTION! Before sewing,
print paper patterns and lay them out according to the linen width (from 90 to
150 cm) to find out how much material you need (do not forget about double and
symmetric details).
WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE
COINCIDING!
CUTTING:
Fabric:
1. Front part –
2 pieces
2. Cuff – 2
pieces
3. Front neckline facing – 1 piece
4. Back neckline facing – 2 pieces
5. Waistband –
2 pieces
6. Back part –
2 pieces
Fusing: cuff,
front/back neckline facing.
INSTRUCTIONS:
1. Apply the fusing to wrong side of
cuff, front/back neckline facing.
2. Neaten middle edge of front/back parts. Stitch
front middle edge and press it apart. Stitch back middle edge up to closure
notch. Press back middle seam apart, press closure slits.
3. Neaten garment side edges and sleeve lower edge and
stitch them leaving a slit in left side seam and slits into sleeve lower seam.
Press side seams apart, press slits. Stitch garment shoulder seams and sleeve
upper edge and neaten them. Press shoulder seams backward.
4. Stitch facings’ shoulder edges and press them
apart. Neaten facings’ outer edge. Stitch the zipper into back middle seam.
Overstitch front/back necklines with facings. Fold back facing’s middle edge
under and stitch it to zipper braid. Topstitch overstitching allowance of
front/back necklines on overstitching at 0.2 cm from seam.
5. Fold
waistband details and stitch side edge. Press waistband side seam apart. Neaten
waistband inner edge. Press the waistband along the center right side out.
6. Make
a stitch with loose loops at 0.5 cm from garment hem. Gather blouse hem in
according to size.
7. Make
decorative stitch along left side slit at 0.5-cm distance. Stitch the waistband
to blouse hem. Overstitch waistband ends. Cut extra allowance and turn
waistband ends into right side. Press the waistband and topstitch it along the
seam joining the waistband.
8.
Neaten cuff inner edge. Overstitch cuff corners. Cut extra fabric into corners.
Cut extra allowances of the cuff. Turn the cuff right side out and press it.
9. Make
loose stitches along sleeve hem and pleat it. Stitch inner cuff to sleeve hem.
Topstitch the cuff along the seam joining the cuff. Make buttonholes into cuff
and sew buttons.
Our advice: if you wish, you can trim waistband separately,
in according to sketch.