YOU NEED: silk/viscose; 8
eyelets; fusing.
IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM
ALLOWANCE IS PROVIDED,
IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM
ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE:
1 cm for all seams, 3 cm for hem.
ATTENTION! Before sewing,
print paper patterns and lay them out according to the linen width (from 90 to
150 cm) to find out how much material you need (do not forget about double and
symmetric details).
WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE
COINCIDING!
CUTTING:
Fabric:
1. Upper front part – 2 pieces
2. Back part – 2 pieces
3. Front facing –
4 pieces
4. Back facing – 4 pieces
5. Front inset – 2 pieces
6. Back inset –
2 pieces
7. Lower back
part – 1 piece
8. Lower front
part – 1 piece
Fusing: front/back facing.
INSTRUCTIONS:
1. Apply the fusing to wrong side of
front/back facing.
2. Stitch upper front darts,
press them towards front center.
3. Stitch front inset to
upper front part. Neaten the seam and press it toward the inset.
4. Stitch back inset to
upper back part. Neaten the seam and press it toward back inset.
5. Stitch the facing to
upper front part. Press the seam towards the facing.
6. Stitch back facing to
upper back part. Press the seam toward back facing.
7. Neaten middle back edge,
stitch it and press the seam apart.
8. Neaten front/back armhole
edges and topstitch them.
9. Neaten top’s shoulder edges. Stitch
shoulder edges and press them apart. Topstitch at 1 cm on both sides of
shoulder seam.
10. Cut fabric stripes for ties. Fold the tie
along the center wrong side out, adjust edges and overstitch at 0.5-0.7 cm fro,
edges. Fold the tie right side out, place the seam on bending, then press the
seam.
11. Pull ties into shoulder
seams.
12. Stitch middle seam of
back neckline inner facing, then press it apart. Neaten facings’ outer edge.
Fold inner facings on outer ones coinciding shoulder seams, then overstitch.
Topstitch overstitching allowances on inner facing at 0.2 cm from seam.
Topstitch facing’s neatened edge on the seam joining the facing.
13. Make loose-looped stitch
at 0.5 cm from back/front parts’ upper edge. Pull detail’s upper
edge correspondingly to
front/back inset lower
edge.
14.
Stitch back part’s lower edge to back inset. Neaten the seam and press it
toward the inset.
15.
Stitch lower front part to front inset to that front parts meet. Neaten the
seam and press it toward the inset.
16. Stitch top’s side seams
and neaten them. Press side seams backwards.
17.
Neaten top’s hem, fold it under and topstitch.
18. Set eyelets into front
edgings. Pull
the cord into eyelets.