YOU NEED: denim, fusing, zipper, 3
buttons.
IF THE PATTERNS
HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS
HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE: 1 cm for all seams, 2 cm for hem.
ATTENTION! Before sewing, print paper patterns and lay them out
according to the linen width (from 90 to 150 cm) to find out how much material
you need (do not forget about double and symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fabric:
1. Back
yoke – 2 pieces
2. Back
inset – 2 pieces
3. Back skirt – 2 pieces
4. Center front skirt – 2
pieces
5. Front inset – 2 pieces
6. Button catch – 1 piece
7. Pocket – 2 pieces
8. Flap – 2 pieces
9. Waistband – 1 piece
10. Belt loop – 1 piece
Fusing:
waistband, button catch.
INSTRUCTIONS:
1. Apply
the fusing to wrong part of waistband and button catch.
2. Stitch
back pleats.
3. Stitch
center front skirt to front inset. Neaten the seam and press it towards the
center. Topstitch the detail at 0.5 cm from the seam.
4. Stitch
the yoke to back inset. Neaten the seam and press it towards back inset.
Topstitch the detail at 0.5 cm from the seam.
5. Stitch
the inset to back skirt. Neaten joining seam and press it backwards. Topstitch
the details at 0.5 cm from the seam.
6. Stitch
back middle edge. Neaten middle seam and press it right wards. Topstitch the detail at 0.5 cm from the seam.
7. Cut fabric piping for edging of pocket and flaps
(45 degrees), fold the piping along the center and press it. Stitch the piping
pocket’s/flap’s outer edges (piping’s bend is at 0.75 cm width on the garment).
Cut seam allowances to 0.5 cm width. Fold pipings into wrong side, press them
and topstitch them on the pocket and on the flap. Piping is 6 cm wide. Neaten
patch pocket’s/flap’s upper edges. Fold pocket’s upper edge into wrong side and
topstitch it.
8. Mark
pocket’s/flap’s place on front skirt. Topstitch the pocket on front skirt
according to marking. Stitch the flap according to marking. Fold the flap
downwards and topstitch at 0.5 cm from bending.
9. Neaten
middle front edge with fly front. Stitch middle front seam up to the mark of
stitching the zipper. Pres middle front seam apart. Topstitch the detail at 0.5
cm from the seam.
10. Press closure
one-piece facing into wrong side. Stitch the zipper under slit’s left edge.
Stitch zipper’s free braid to right edge (one-piece facing). Fold button catch
along the center and overstitch lower shirt edge. Topstitch closure one-piece
facing on button catch (left edge). Topstitch slit’s right edge catching the
facing.
11. Fold belt loop along the center wrong side out,
adjust edges and overstitch at 0.5-0.7 cm from edges. Turn it right side out,
place the seam on bending or create edging of 0.1-0.2 cm width into inner side,
then press.
12. Press the waistband along the center right side
out, then neaten inner lower edge. Cut belt loops and topstitch them on
waistband.
13. Stitch the
waistband to skirt’s upper edge. Overstitch waistband’s ends, cut seam
allowances in corners, then turn right side out. Topstitch waistband’s lower
neatened edge on joining seam and press ready waistband.
14. Neaten skirt’s
hem, fold it under and topstitch.
15. Make a
buttonhole into waistband’s right ends, sew a button on left one. Make
buttonholes into the flap, sew buttons on the pocket.