YOU NEED: silk/viscose;
fusing; 8 buttons; decorative braid; piping.
IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM
ALLOWANCE IS PROVIDED,
IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM
ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE:
1 cm for all seams, 2 cm for hem.
ATTENTION! Before sewing,
print paper patterns and lay them out according to the linen width (from 90 to
150 cm) to find out how much material you need (do not forget about double and
symmetric details).
WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE
COINCIDING!
CUTTING:
Fabric:
1. Back part – 2 pieces
2. Lower front part – 1 piece
3. Upper front part – 2 pieces
4. Back sleeve – 2 pieces
5. Front sleeve – 2 pieces
INSTRUCTIONS:
1. Stitch back darts, press them toward back center. Stitch darts into
lower front part, press darts towards center of lower front part.
2. Make loose-loop stitch at 0.5 cm from upper front
part’s lower edge. Pull upper front part’s lower edge. Stitch upper front part
to lower front part. Neaten the seam and press it downwards.
3. Mark closure slit into lower front part. Cut lower front part. Cut
loops of decorative braid, fold them and stitch to the slit. Press the piping
along the center. Overstitch front slit with the piping.
4. Neaten middle back part. Stitch middle back seam and press it apart
up to the zipper closure notch. Press closure slit edges. Stitch the zipper in.
5. Stitch sleeve upper edge. Neaten sleeve’s upper seam and press it
toward back part.
6. Stitch sleeve lower edge. Neaten sleeve lower edge and press it
backwards.
7. Stitch dress’s side edges. Neaten side seams and press them
backwards.
8. Stitch sleeves into
armholes. Neaten joining seams.
9. Press the piping along
the center. Overstitch piping’s corners, slash allowances and turn it right
side out. Sew the piping to back/front necklines.
10. Neaten dress/sleeves
hem, fold them into wrong side and topstitch along edges.
11. Sew buttons on left
front edging.