YOU NEED: silk/viscose;
fusing; piping.
IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM
ALLOWANCE IS PROVIDED,
IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM
ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE:
1 cm for all seams, 0 cm for garment/sleeve hems, waistband, shaped ties
and front bands allowances.
ATTENTION! Before sewing,
print paper patterns and lay them out according to the linen width (from 90 to
150 cm) to find out how much material you need (do not forget about double and
symmetric details).
WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE
COINCIDING!
CUTTING:
Fabric:
1. Right front part – 1 piece
2. Left front part – 1 piece
3. Back part – 2 pieces
4. Side back part – 2 pieces
5. Collar – 2 pieces
6. Waistband –
2 pieces
7. Back sleeve
– 2 pieces
8. Front sleeve
– 2 pieces
Fusing: outer collar.
INSTRUCTIONS:
1. Apply the fusing to wrong
side of outer collar.
2. Stitch front darts. Slash darts’ depths and
neaten them.
3. Stitch back relieves. Neaten them and press toward
back center.
4. Neaten blouse’s side edges. Stitch side seams and
press them apart leaving a hole in left seam. Topstitch the hole in left seam.
Stitch shoulder seams, neaten them and press backwards.
5. Lay collars together.
Overstitch inner collar with outer collar, cut corner allowances and turn the
collar right side out. Press the collar.
6. Stitch the waistband to right/left front part. Neaten the seam.
7. Press the piping along the center. Overstitch edges of front
neckline, waistband, front/back parts’ hems, back sleeves’ hems, sleeve shaped
tie, front sleeves’ hems and shaped tie with piping.
8. Stitch sleeve seams and
neaten them. Press sleeve seams.
9. Stitch outer collar into
neckline, fold inner collar’s open edge under and topstitch it along joining
seam.
10. Stitch sleeves easing
them along sleeve caps. Neaten joining seams.