YOU NEED: sheer silk and viscose; fusing; piping.
IF THE PATTERNS
HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS
HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCES: 0 cm for armhole edges, 1 cm for other seams.
ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150
cm) to find out how much material you need (do not forget about double and
symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fabric:
1. Right
front part – 1 piece
2. Left
front part – 1 piece
3. Back part – 2 pieces
4. Side
back part – 2 pieces
5. Left waistband – 2 pieces
6. Right waistband – 2 pieces
7. Back facing – 1 piece
8. Front facing – 2 pieces
Fusing: front/back
facings.
INSTRUCTIONS:
1. Apply the
fusing to wrong side of front/back facings.
2. Stitch front darts. Slash depths
and neaten them.
3. Stitch back relieves. Neaten back relieves and press them toward the
center.
4. Stitch shoulder edges together. Neaten seams and press them backward.
5. Press the piping along the center. Overstitch armholes with the
piping.
6. Stitch facings along shoulder edges. Neaten the seam and press it
frontward. Neaten facings’ outer edges.
7. Overstitch front/back necklines with the piping.
Turn the seam right side out and press it.
8. Neaten side edges. Stitch side seams and press them apart excluding a
hole into right seam. Make decorative stitch along side hole.
9. Overstitch waistbands. Turn the details right side out and press
them.
10. Neaten the hem. Press the seam into wrong side.
11. Lay the waistband on front part’s right side. Fold
neckline facing/the hem toward the waistband. Stitch the waistband to front
part with one seam (to right/left front parts correspondingly). Neaten the
seam, turn it right side out and press.
12. Topstitch hem allowance. Press the seam.