YOU NEED: natural/mixed fabric; fusing; piping; 1
button.
IF THE PATTERNS
HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS
HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCES: 0 cm for neckline/armholes, 1 cm for other seams.
ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150
cm) to find out how much material you need (do not forget about double and
symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fabric:
1. Back part – 1 piece
2. Front part – 1 piece
3. Waistband – 2 folded pieces
Fusing:
1. Waistband – 1 piece
INSTRUCTIONS:
1. Apply the fusing to wrong
side of the waistband.
2. Cut a “drop” into wrong
part.
3. Press the piping along
the center and overstitch “drop”’s edge.
4. Overstitch front/back
neckline with the piping making a loop in right front part.
5. Stitch front darts. Press
darts upward.
6. Overstitch armholes with
the piping making a strap of the piping. Regulate strap’s length during
fitting-on.
7. Stitch left side seam
leaving a lit for the waistband. Neaten the seam and press it apart pressing
slit edges.
8. Stitch right side edge.
Neaten right side seam and press it backward.
9.
Overstitch the waistband beginning at the notch, overstitching waistband’s
ends, and along lower edge. Turn the waistband right side out and press it.
10. Make loose stitches at 0.5
cm from lower edge along the hem. Gather the fabric slightly.
11. Stitch
waistband’s right side to the garment Press the seam toward the waistband.
Press waistband’s open edge downward and topstitch along the seam.
12. Sew
the button on left front part.