YOU NEED: natural/mixed fabric; fusing; piping; elastic
braid of 0.3 cm diameter.
IF THE PATTERNS
HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS
HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE: 0 cm for armholes, 1 cm for other seams.
ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150
cm) to find out how much material you need (do not forget about double and
symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fabric:
1. Back part – 1 piece
2. Front part – 1 piece
3. Collar – 2 pieces
Fusing:
1. Collar – 1 piece
INSTRUCTIONS:
1. Apply the fusing to wrong
side of the collar.
2. Stitch front darts, press
them upward.
3. Stitch side edges. Neaten
side seams and press them backward.
4. Press the piping along
the center and overstitch armholes.
5.
Overstitch the collar: begin at the notch, overstitch collar ends and them
along upper edge. Turn the collar right side out and press it.
6. Stitch
outer collar to the garment. Press the seam toward the collar. Press collar's
open edge sidewise and topstitch along the seam.
7. Fold
the hem under and sew.
8.
Topstitch elastic braid as marked.