5670

YOU NEED: middle/high stretchable jersey (natural or mixed).

IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED, IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.

SEAM ALLOWANCES: Seam allowances: 0.5 cm for the hem; 1 cm for other seams.

ATTENTION! Before sewing, print paper patterns and lays them out according to the linen width (from 90 to 150 cm) to find out how much material you need (do not forget about double and symmetric details).

WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!

CUTTING:

Fabric:

1. Back part – 1 piece

2. Front part – 2 pieces

3. Front yoke – 2 pieces

4. Sleeve – 2 pieces

5. Collar – 1 piece

NB! Please make doubt that person’s head passes through the ring-stitched before you begin sewing.

OUR ADVICE: stitch jersey details with special elastic/zig-zag stitches. If you use an overlock, cut seam allowances till 0.6-0.8 cm width. Topstitch hem allowances with double needle to save elasticity.

INSTRUCTIONS:

1. Slash front part’s allowance at relieve edge mark. Neaten the edge between the neckline and the mark, press it into wrong side, and then topstitch.

2. Neaten front lower edge/wrap edge, press them into wrong side, then topstitch.

3. Make front pleats. Fix pleat ends with stitches.

4. Stitch front yoke to front part. Neaten seams and press them.

5. Lay one front part on another to make a wrap, then fix them together. Coincide front edges and back edges. Side front edge is 1.5 cm shorter than lower back edge. Stitch side edges together. Neaten seams and press them.

6. Stitch shoulder front/shoulder back edges. Neaten seams and press them backwards.

7. Stitch sleeve seams. Neaten seams and press them.

8. Stitch sleeves into armholes coinciding notches. Neaten seams and press them.

9. Neaten lower back edge/sleeve lower edges. Press them into wrong side, then topstitch.

10. Stitch the collar as a ring. Press the collar along the center wrong side out. Stitch outer collar to back neckline/yoke coinciding edges. Collar seam is at shoulder left seam. Fold collar allowances under and stitch them together.