YOU NEED: silk or
fabric with artificial fibers.
IF THE PATTERNS
HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS
HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCES: 1 cm for all seams, 2 cm for the hem.
ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150
cm) to find out how much material you need (do not forget about double and
symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fabric:
1. Back
part – 1 piece
2. Front
part – 1 piece
3. Back
facing – 1 piece
4. Front
facing – 1 piece
INSTRUCTIONS:
1. Stitch shoulder edges. Press shoulder seam apart and neaten them.
2. Apply the fusing to wrong side of front/front facing slit. Stitch
front/back facings’ shoulder edges. Press shoulder seam apart. Lay the facing
on the garment right sides together, then overstitch the neckline as well as
along the clit; do not stitch a segment at mark level. The seam at slit op is
0.5 cm, the seam at slit bottom is 0.2 cm. Cut the
slit. Fold the facing into wrong side and press it folding under facings at
unstitched segment.
3. Stitch blouse side edges. Press side seams backward and neaten them.
4. Cut 8 ties of necessary length and of 4 cm width. Press ties along
the center right side out. Then lay them flat and press long edges to marked
center line. Fold ties along middle line coinciding bendings,
then topstitch at 0.1 cm.
5. Make loose stitches along neckline as marked. Pull stitches to necessary
length and fix them. Set ties into unstitches segments of front slit and fix
them with machine stitches.
6. Cut a piping of 4 cm width and of length equal to armhole length.
Press the piping along the center right side out. Lay the piping on the armhole
right sides together and overstitch. Fold the piping into wrong side. Topstitch
seam allowance on the piping with 0.1 cm width seam. Topstitch piping’s bending on the armhole.
7. Neaten the hem, fold it into wrong side and topstitch.