YOU NEED: sheer natural/mixed fabric; fusing; bride of 7 cm long.
IF THE PATTERNS
HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS
HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE: 1 cm for all seams.
ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150
cm) to find out how much material you need (do not forget about double and
symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fabric:
1. Back
part – 1 piece
2. Front
part – 1 piece
3.
Waistband – 2 pieces
4. Sleeve
facing – 2 pieces
5. Back
neckline facing – 1 piece
6. Front
neckline facing – 1 piece
INSTRUCTIONS:
1. Apply the fusing to wrong side of
front/back neckline facings as well as of sleeve facings.
2. Stitch sleeve upper edges. Press sleeve upper seams backward and
neaten them.
3. Stitch side edges and sleeve lower edges with the same stitch folding
details wrong side out.
4. Stitch neckline facing’s shoulder edges, press seams apart. Lay
facing’s right side on blouse wrong side and overstitch the neckline. Slash
allowances at roundings, turn the facing into right
side, fold lower edge under and topstitch the facing on the blouse with 0.1 cm
stitch.
5. Stitch sleeve facings’ edges, press seams apart. Lay facing’s right
side on sleeve’s wrong side and overstitch sleeve hem. Slash allowances at roundings, turn the facing into right side, fold lower edge
under and topstitch the facing on the blouse with 0.1 cm stitch.
6. Slash blouse hem at notches. Neaten a segment between marks. Fold
neatened edge into wrong side and lay the bride under it. Stretch the bride and
topstitch with zig zags
leaving 1 cm ends.
7. Lay waistbands right sides together and overstitch along three edges:
between the notch and side edge, side and lower edge. Turn the detail right
side out and press it.
8. Stitch outer waistband to blouse hem catching bride end into the
seam. Fold the raw allowance under and topstitch along the seam joining the
waistband.