YOU NEED:
natural/mixed fabrics (silk).
IF THE PATTERNS
HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS
HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCES: 1 cm for all seams, 2 cm for the garment.
ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150
cm) to find out how much material you need (do not forget about double and symmetric
details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fabric:
1. Back
part – 1 piece
2. Front
part – 1 piece
3. Back sleeve – 2 pieces
4. Front sleeve – 2 pieces
5. Front
detail – 1 piece
6. Back facing – 1 piece
7. Front facing – 1 piece
INSTRUCTIONS:
1. Stitch side edges excluding a
slit for closure in left side edge. Press right side seam backward pressing,
press left side seam apart pressing closure slit. Neaten seams.
2. Stitch the zipper into left side seam.
3. Stitch garment shoulder edges, press seams and neaten them.
4. Stitch facings’ shoulder seams and press them apart.
5. Fold front detail along the center right side out. Lay the facing on
the blouse right sides together, insert front detail between them and
overstitch. Slash seam’s roundings, fold the facing
into wrong side and press it.
6. Slash armholes at notches. Cut a piping of 4 cm width and of length
equal to armhole lower part’s length. Press the piping long the center right
side out. Lay the piping on armhole lower part right sides together, then overstitch. Fold the piping into wrong side. Topstitch
seam allowance on the piping with the seam of 0.1 cm width.
7. Press sleeve upper edge into wrong side and topstitch it. Stitch
sleeves into armhole upper part. Neaten seams.
8. Neaten garment/sleeve hems, fold into wrong side and topstitch.