YOU NEED: hard
stretchable jersey/fabric with elastic fibers.
IF THE PATTERNS
HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS
HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCES: 1 cm for all seams.
ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150
cm) to find out how much material you need (do not forget about double and
symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fabric:
1. Back
part – 2 pieces
2. Right
front part – 1 piece
3. Left front part – 1 piece
OUR ADVICE: stitch jersey details with
special elastic/zig zag
stitches. If you use an overlock, cut seam allowances
till 0.6-0.8 cm width. Topstitch hem allowances with double needle to save
elasticity.
INSTRUCTIONS:
1. Stitch back
darts. Press darts toward center.
2. Stitch
middle back edge. Press the seam leftward and neaten it. Neaten back lower
edge.
3. Stitch left front dart. Press it toward detail’s center.
4. Slash right lower allowance at dart’s right side. Neaten the
allowance, press it into wrong side and topstitch; stop stitching few
centimeters before side seam.
5. Stitch right front dart. Cut dart depth to 1 cm and neaten it,
continue neatening lower edge.
6. Stitch blouse shoulder edges. Press seams backward and neaten them.
7. Neaten front/back neckline allowance, press it into wrong side and
topstitch.
8. Stitch left front part to right front part. Press the seam downward
and neaten it.
9. Stitch side edges. Press seams backward and neaten them.
10. Neaten armhole allowances. Press the hem/armhole allowances into
wrong side and topstitch.