5697 SKIRT

YOU NEED: well-diapering natural/mixed fabric.

IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,

IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.

SEAM ALLOWANCES: 1 cm for all seams, 2 cm for front/back skirts’ upper edge as well as for the hem.

ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150 cm) to find out how much material you need (do not forget about double and symmetric details).

WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!

CUTTING:

Fabric:

1. Back skirt – 1 piece

2. Front skirt – 1 piece

3. Loop – 2 pieces

4. Tie - 2 pieces

INSTRUCTIONS:

1. Stitch back darts, press them toward the center.

2. Make pleats into front skirt’s right side, then stitch them. Press pleats downward.

3. Fold ties along the center wrong side out and overstitch one long/one short edges. Turn details right side out and press them. Topstitch ties at 0.1 cm from edges.

3. Stitch skirt’s side edges inserting ties. Press seams backward and neaten them.

4. Press skirt upper edge’s allowance into wrong side, fold it under and topstitch.

5. Press the hem into wrong side, fold it under and topstitch.

6. Neaten loops’ edges. Press loop long edges into wrong side and topstitch. Fold short edges into wrong side. Lay loops on front/back skirts as marked and topstitch at 0.1 cm from bending.

7. To make the skirt be fasten on the body, we recommend the following: fold the skirt along side seams, displace side seams 2.0-2.5 cm toward front skirt and fix skirts together with a stitch of approximately 10 cm. At waistline bendings: fix front/back skirts together by means of snaps and buttonholes with buttons.