See details for work with faux fur at How to use the
CD.
You need: faux sheepskin (short/middle hair); 3 toggles.
IF THE PATTERNS
HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS
HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCES: 4.5 cm for all open edges (front
edging, garment/sleeve hems, hood hem), 1.5 cm for other seams.
ATTENTION! Before sewing, print paper patterns and lay them out
according to the linen width (from 90 to 150 cm) to find out how much material
you need (do not forget about double and symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
ATTENTION! Before sewing, print paper patterns and lay them out
according to the linen width (minimal width is 150 cm) to find out how much
material you need (do not forget about double and symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
PLEASE KEEP BEAM THREAD DIRECTION.
SEAM ALLOWANCES: 2 cm for left side
seam (to stitch the zipper). 1 cm for other seams
CUTTING:
Fabric:
1. Side front part – 2 pieces
2. Center front part – 2 pieces
3. Back part – 2 pieces
4. Hood front – 2 pieces
5. Hood back – 2 pieces
6. Sleeve
– 2 pieces
INSTRUCTIONS:
1. Stitch
side/center front parts with their furs together. Lay seam allowances apart and
paste them.
2. Lay back parts with their furs together, then stitch back middle
edges. Lay seam allowances apart and paste them.
3. Stitch shoulder
edges. Lay seam allowances apart and paste them.
4. Stitch sleeves into open armholes according to notches. Slash
allowances, lay them apart and paste sleeve allowances on the sleeves, paste
armhole allowances on front/back parts.
5. Stitch sleeve seam/side seam as
one stitch. Lay seam allowances apart and paste them.
6. Stitch hood back to hood front. Lay seam
allowances apart and paste them. Stitch hood
along middle line. Lay seam allowances apart and paste them.
7. Stitch the hood to the garment. Slash allowances, lay them apart and
paste hood allowance to the hood, paste neckline allowance to front/back parts.
8. Slash
front edging/sleeve hems/hem/hood allowances, fold them into suede side, then
topstitch.
9. Sew the fastener as marked.