SEAM ALLOWANCES: 1.5 cm for all seams.

ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150 cm) to find out how much material you need (do not forget about double and symmetric details).

WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!

CUTTING:

Faux fur:

1. Back sleeve – 2 pieces

2. Front sleeve – 2 pieces

3. Back part – 1 piece

4. Front part – 2 pieces

5. Hood – 2 pieces

Faux leather:

1. Back placket – 1 piece

2. Lower front placket – 2 pieces

3. Front placket – 4 pieces

4. Hood placket – 1 piece

5. Cuff – 2 pieces

6. Valance – 2 pieces

Lining:

1. Back sleeve – 2 pieces

2. Front sleeve – 2 pieces

3. Back part – 1 piece

4. Front part – 2 pieces

5. Hood – 2 pieces

6. Upper sacking – 2 pieces

7. Lower sacking – 2 pieces

Fusing:

1. Back placket – 1 piece

2. Lower front placket – 2 pieces

3. Front placket – 4 pieces

4. Hood placket – 1 piece

5. Cuff – 2 pieces

NB: please try faux-leather details of unneeded material before you double them of the leather.

INSTRUCTIONS:

1. Apply the fusing to wrong side of faux-leather details.

2. Stitch upper front darts.

3. Stitch the valance to lower sacking. Lay the sacking to valance on back part’s right side according to notches; lay upper sacking’s right side on front part, then stitch. Fold the seam out and topstitch it on the sacking.

4. Stitch front sleeve to front part. Stitch back sleeve to back part.

5. Stitch shoulder edges together with sleeves’ upper edges.

6. Press a cuff along the center right side out. Stitch cuff’s upper edge to sleeve hem.

7. Stitch sleeve lower edge and side edge together with sackings.

8. Stitch lower front plackets to lower back placket. Press lower plackets along the center right side out. Stitch placket’s upper edge to jacket’s hem.

9. Stitch the zipper to front outer plackets’ edges. Stitch front plackets to front edges up to the hem allowance.

10. Stitch hood middle edges. Press hood placket along the center right side out. Stitch placket’s upper edge to hood outer edge. Fold the placket along the center wrong side out, then overstitch lower corners; do not catch placket inner edge’s allowance. Cut corner allowances, turn the placket right side out.

11. Stitch the hood into garment neckline.

12. Stitch lining pieces in the same way as fur ones leaving a hole into left sleeve lower seam (to turn the garment right side out). Stitch the lining to lower placket’s edge right sides together. Stitch front inner placket to lining edges to the hem allowance.

13. Lay the lining on the garment right sides together and overstitch front placket’s lower corner/front edge/food inner edge. Overstitch sleeve hems with the lining. Turn the jacket right side out though the hood in the sleeve seam. Fix the lining to the garment along hood middle seam/hood placket/hood joining seam/cuffs/lower placket. Stitch sleeve hole’s edges together.

14. Make fixing topstitching along the zipper.