5709 FUR JACKET
See details for work with faux fur at How to use the
CD.
YOU NEED: faux fur; lining; faux leather.
IF THE PATTERNS
HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS
HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
ATTENTION! Before sewing, print paper patterns and lay them out
according to the linen width (from 90 to 150 cm) to find out how much material
you need (do not forget about double and symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fur:
1. Back part – 1 piece
2. Front
part – 2 pieces
3. Sleeve
– 2 pieces
4. Belt –
1 piece
5. Back
neckline facing – 1 piece
6. Belt
loop – 1 piece
7. Valance
– 2 pieces
8. Hood –
2 pieces
Lining:
1. Back part – 1 piece
2. Front
part – 2 pieces
3. Sleeve
– 2 pieces
4. Upper
sacking – 2 pieces
5. Lower sacking
– 2 pieces
NB: when cutting lining front/back pieces,
do not take into account front bands/back neckline facing widths
correspondingly.
INSTRUCTIONS:
1. Stitch
the valance to lower sacking. Lay the sacking with he valance on back part’s
right side according to notches, lay upper sacking’s right side on front part,
then stitch. Fold the seam out and topstitch it on the sacking.
2. Stitch
shoulder seams.
3. Stitch
hood middle edges together. Slash seam allowance at neck base. Stitch the hood
into the neckline.
4. Stitch sleeves
into armholes.
5. Stitch sleeve
edges/side edges with sackings with one seam.
6. Cut belt loops of faux leather. Roll loops in 3 layers and topstitch
long edges at 0.2 cm from edges. Topstitch belt loops on side seams according
to marks. Our advice: you can topstitch additional belt loop on right front edging’s right
side at side loops level to make garment more comfortable.
7. Stitch back neckline facing to front bands. Stitch inner hood’s middle
edges. Slash seam allowance at neck base. Stitch the hood into facing neckline.
Press one-piece front bands into wrong side. Fix middle seam allowances of both
hoods together.
8. Cut 2 ties of the lining: 40 cm length and 4 cm
width. Press ties along the center right side out. Lay them flat and press long
edges toward the center. Then fold a tie along the center again and topstitch
it at 0.1 cm from edges. Sew ties to left front band and to right side lining
seam at waistline level.
9. Stitch lining pieces excluding a hole into sleeve left seam (to turn
the garment right side out). Lay the lining on the jacket right side together
and stitch to front bands’ inner edges/back neckline facing. Overstitch front
edgings’ lower corner strictly along marked hem. Cut seams in front edgings’
lower corners. Fold lining sleeves under and stitch them to jacket’s sleeve
hems.
10. Stitch the lining to jacket hem. Turn the jacket right side out
through sleeve hole, stitch hole edges together.
11. Lay the belt wrong side out and overstitch it
along outer contour excluding a hole in the middle of upper seam. Turn the belt
right side out and stitch hole edges together.