See details for work with faux fur at How to use the
CD.
YOU NEED: faux sheepskin with short hair; leather braid (trimming), 1 button.
IF THE PATTERNS
HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS
HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE: 0 cm for front edgings/lapel
edges/garment hem /cuff lower edges/collar fall/collar corners as well as all
center/side back/front lower edges and sleeve hems, 0.5 cm for collar joining
seam, 1.5 cm for other seams.
ATTENTION! Before sewing, print paper patterns and lay them out
according to the linen width (from 90 to 150 cm) to find out how much material
you need (do not forget about double and symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Sheepskin:
1. Side upper front part – 2 pieces
2. Side upper
back part – 2 pieces
3. Center upper back part – 2 pieces
4. Center upper
front part – 2 pieces
5. Lower back part – 1 piece
6. Lower front part – 2 pieces
7. Collar – 1 piece
8. Sleeve – 2 pieces
9. Cuff –
2 pieces
INSTRUCTIONS:
NB! Lower front/back parts, cuffs and collar right side:
fur; other pieces: suede.
1. Stitch
upper front/back relieves. Lay seam allowances apart. Topstitch a piece of
leather braid above relieves (right side) catching seam allowances.
2. Mark
decorative line on lapel’s fur side: between the notch pointing collar joining
end and lapel folding line. Topstitch leather braid along marked line.
3. Stitch middle back edges. Lay seam allowances apart.
4. Stitch upper side
edges. Lay seam allowances apart.
5. Stitch lower side edges excluding 5 cm segment in left side seam. Lay
seam allowances apart and paste them.
6. Stitch
upper/lower parts together with lapel seams. Topstitch a piece of leather braid
above seams.
7. Stitch shoulder
edges. Lay seam allowances apart.
8. Stitch sleeve seams. Cut seam allowances close to stitches.
9. Trim cuff edges with braid. Coincide cuff ends and marks, then stitch
cuffs as rings. Stitch cuffs to sleeves with lap seams.
10. Stitch sleeves into armholes according to notches.
11. Trim collar’s open edges.
12. Lay the collar on the garment
suede sides together. Stitch the collar to the garment with zig zags. Do not
fold the collar out and trim with leather braid: (begin at left lower side
seam) left front edging, left lapel edge, collar joining edge, right lapel
edge, right front edging, back hem, stop at left side seam. Stitch a segment in
left side seam. Paste seam allowances.
13. Make a
buttonhole into right front edging, sew a button on the left one.